Make a blog

toupee

2 years ago

Agricultural machinery subsidy landing, Industry 4.0 re-policy support

Agricultural machinery subsidy landing, Industry 4.0 re-policy support

Agricultural machinery: Department of Agriculture and the Ministry of Finance jointly issued the "2015-2017 agricultural machinery purchase subsidy implementation guidance," re-development of the industry policy support. Land transfer will accelerate agricultural industry has brought four major changes: mechanization rate increase, agricultural structural change (farm size, features), agricultural finance and agricultural information (agricultural electromechanical providers) acceleration. Recommended Jianghuai Engine, Yoshimine agricultural.


 
Robotics and Automation: Ministry issued "two deep integration of raw material industry promotion plan (2015-2018)", leading enterprises usher in a historic opportunity for development. Industrialization, information technology industry were 3.0, 4.0 core content industry, promote two of the depth of integration is based on the existing through the use of industrial robots, the Internet industry, big data, sensors, cloud computing and other technologies to further enhance the automation of production processes , digital, intelligent. Recommend Hyderabad control, star technology, robotics.

 

The introduction of new technology and equipment agricultural experiment accelerated. Combine Harvester technology mechanized cotton, rice and onion harvester broadcast technology, unmanned remote plant protection machine, intelligent networking equipment, such as the new precision seeder new technology and equipment in the city to carry out the test, in which precision sowing corn, rice and dry live, green onions and other mechanized harvesting techniques experimentally obtained initial results for further demonstration of the foundation.


 
Agricultural safety supervision work to a new level. The city's agricultural safety supervision comprehensive free, total agricultural supervision fees waived more than 100 million. Registration rate of agricultural inspection rate and rate of licensed drivers were 90.3%, 67.2% and 86.4%, among the nation's advanced ranks. Jinghai County, was named the national "safe agricultural" model county, becoming the Jinnan, Beichen, Wuqing, Baodi, Chittagong city and Jixian Section 7 demonstration counties.

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850998/Toupee-s-blog/Car-tyre-life

2 years ago

Car tyre life

Car tyre life

Tyre life with many factors, such as weather, road, driving style, installation, maintenance and so on. From the international rules, if the tyre is normal, tyre wear to 1.6 mm tread depth must be replaced. Almost all of the tyres tread depth of 1.6 mm with marking, known as tread wear indicator tabs TWI. Ordinary tyres normal use, are able to use the 5-10 million km, of course, except the life of the tyres, as well as comfort, handling, grip, etc., and this is where the competition of different brands of tyres. Good brand, its comprehensive ability.


 
Typically mounted on a metal rim, capable of supporting the vehicle body, the buffer external shock, brought into contact with the road surface and to ensure vehicle performance. Tires often in complex and harsh conditions, when it is traveling bear various modifications, load, force, and high and low temperature effect, and therefore must have a high bearing capacity, traction, cushioning properties. Meanwhile, also requires high wear resistance and flex resistance, and low rolling resistance and heat buildup. World consumption of half the amount of rubber for tire production, consumption capacity of the tire rubber is visible.

 

Further, if the tyre fails, such as sidewall cut, must be replaced immediately.

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850998/Toupee-s-blog/Car-tyre-life

2 years ago

Hair Directions for Hair Replacement System

Hair Directions for Hair Replacement System

Hair Direction is the hair style for hair replacement system. There are 11 kinds of different hair styles during procedure. Please find the explanation below:


 
A. Left crown, right crown and center crown
The hair departs from the crown. Some customers require small crown, the crown can be made in heavier density accordingly. Also, if some customers want bigger crown, the density of crown can be made a lighter.

B. Left parting, right parting and middle parting
The hair departs from the parting area. The parting is definate on the hair replacement system. 

C. Left breaking, right breaking and middle breaking
The hair also departs from the breaking area. They are almost the same as parting hair direction. The only difference is that the break hair direction isn't as definite as parting hair direction. The density on break area is heavier than other areas. 

 

For a best hair replacement,  it needs several details, such as the hair density, wave ,color and so on.  Maybe it is the first time for some customers to place hair replacements' order.  They don't know how to choose appropriate details. Lord hair prepare several ordering tools for these new customers.

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850996/Toupee-s-blog/Hair-Directions-for-Hair-Replacement-System

2 years ago

Natural Front Hairline Toupee

Natural Front Hairline Toupee

Customers who buy toupees always would like a natural looking toupee. In other words, they want the toupee looks like real hair instead of looking fake. Especially on the front hairline, they don't hope any knots. Usually, lace and pu (thin skin )  are most used base material for toupee. About lace, bleached knots is a good way for making a natural front hairline. And V-looped thin skin or Injected thin skin will lead to a non knots effect on front hairline for thin skin toupee.

 

And some customers also found that the right side of the skin hair replacements is not as good direction as left side. We have one customer who wrote us: "I've been wearing Hair systems for the past 10 years but the always bulge on the right side... just over the right ear. The LEFT-SIDE is always perfect... Sits and combs really well....No one so far got this right for me.... I would love to go and show the hair technician how well the hair looks on one side and ask them to do it exactly the same on the other... I can't understand why this hasn't been corrected???" I understand the problem and explained to him why this problem is not easy to be resolved. Most of the factories use splits knots on skin bases and most of the ventilating workers are right-handed. That's why. I suggested injected hair to him. He agreed to try Injected Skin Hair Replacement after hearing my explanation. Problem solved and he changed to injected skin hair replacements instead of split knots from then on. Do you have met with the same problem? Maybe you can consider to test Injected Skin Hair. 

 

About normal skin hair units with split knots and injected skin unit, I'm not saying which one is good, which one is bad. They are different models of hair replacements with different strong points, so that meet different customers need. Hope this article helps customers to choose the right hair models which fit them perfectly. 

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850994/Toupee-s-blog/Natural-Front-Hairline-Toupee

2 years ago

An overview of nonionic polyacrylamide products

An overview of nonionic polyacrylamide products

Nonionic polyacrylamide is water-soluble polymer or polyelectrolyte. Due to its molecular chain contains a certain number of polar groups, it can through the adsorption of solid particles suspended in water, make the bridge between particles or by charge neutralization condensed to form large floc particles. So, it can accelerate the particles in the slurry settlement, there is a very significant to speed up the solution to clarify, promote such as filtering effect. Mainly used for all kinds of industrial waste water flocculation sink down, precipitation clarification process. Such as paper and pulp waste water treatment, wastewater processing and metal smelting process of wastewater treatment, steel and stone processing plant waste water treatment, etc.

 

The major raw materials for the production of the handmade paper and the other paper products is the actinidia chinensis and the abelmoschus manihot. The paper making pulp is mainly from the abelmoschus manihot root liquid, the carambola cane juice, the holly leaf juice, the machilus pauhoi joice and the waxy leaf juice etc.

 

The new type of the paper making dispersant uses the anionic polyacrylamide product with the 2,000 x 104 molecular weight, the viscosity of its aqueous solution is very high. As a new dispersing agent for the plant fiber, the new type anionic polyacrylamide dispersing agent can make the remarkable effect for the long fiber thin paper product in the fourdrinier paper machine or in the garden net paper machine, with the dosage of 01.% ~ 0.2% (for oven dry pulp) of this new type of dispersing agent of anionic polyacrylamide.

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850993/Toupee-s-blog/An-overview-of-nonionic-polyacrylamide-products

2 years ago

What’s the deal with Oil Drilling Grade Xanthan Gum

What’s the deal with Oil Drilling Grade Xanthan Gum

Unless you do a lot of gluten-free baking, you might not have come across oil drilling grade xanthan gum — at least not in a recipe. Flip over a jar of salad dressing or a carton of ice cream to read the ingredients, and you'll likely find oil drilling grade xanthan gum listed there, too!

 

So, is this a safe ingredient for a gluten-free diet — or an industrial additive to be avoided?

 

Xanthan gum is produced from a certain strain of bacteria (Xanthomonas campestris, according to Wikipedia) reacting with carbohydrates. These carbohydrates are typically derived from corn. The resulting substance has incredible thickening and binding properties when added to water or other liquids.

 

Oil Drilling Grade Xanthan gum swells in the intestine, which stimulates the digestive tract to push stool through. It also might slow the absorption of sugar from the digestive tract and work like saliva to lubricate and wet the mouth in people who don't produce enough saliva.

 

Oil Drilling Grade Xanthan Gum has a number of powerful properties. First, it works as an emulsifier, encouraging liquids that normally don't like one another to mix together. Second, it works as thickener, increasing the viscosity of liquids and batters. Third, it can create a creamy texture.

 

In the world of gluten-free baking, Oil Drilling Grade Xanthan Gum plays the crucial role of imitating gluten. In baking, gluten is what makes dough "doughy." It gives the dough elasticity, as well as viscosity. Those properties help to hold a cookie together while it bakes on a sheet in the oven, and they enable cakes and breads to hold onto the gas bubbles that form inside them - this allows them to rise and take shape. Oil Drilling Grade Xanthan Gum helps replicate these properties in recipes that do not contain gluten.

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850992/Toupee-s-blog/What-s-the-deal-with-Oil-Drilling-Grade-Xanthan-Gum

2 years ago

What is Heat Shrinkable Sleeves?

What is Heat Shrinkable Sleeves?

Heat shrink tubing, also known as heat shrinkable protective sleeve, providing insulation for wires, cables and wire terminals. Has low shrinkage, soft flame retardant, insulation corrosion, etc., are widely used in a variety of wire harnesses, solder joints, inductance insulation and metal pipes, rods rust, corrosion, etc.

 

Flame retardant heat shrinkable tube, insulation, heat resistance, heat shrink tubing is a special polyolefin heat shrinkable sleeve material, but also called EVA material. 

 

When the first  heat shrinkable sleeves out in 35 years ago, polyethylene pipe coating started to replace the asphalt or tape in the oil and gas industry coatings. At that time, polyethylene make the new technology set of support treatment, with sleeves adhesive is roughly the same as those used in the pipeline coating.

 

The technology used to make the sleeve has advanced significantly since then, with the cross linking polyolef in pad and a new generation of adhesive, the new  pipeline provides performance set tougher conditionsated

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850991/Toupee-s-blog/What-is-Heat-Shrinkable-Sleeves

2 years ago

The Proper Casting Processes

The Proper Casting Processes

The sand casting of any object in foundry workshop starts with the pattern making process. The pattern can be made of woods, plastics or metals. In Nigeria, the most widely used pattern by students in Metallurgical Engineering department is those made from wood. The question is: whose function is it to make these patterns? Who makes pattern used in foundry workshops. The answer is: the pattern makers make patterns. It is when these patterns are made that casting will proceed. Remove pattern from sand casting and precision casting in engineering seizes to exist. In the other words, without pattern, there will be no casting process.

 

This is very same process that they make your car's engine, that ring on your finger, or your expensive wrenches in that tool box in the garage. Why pay some one else to do it when you could do it yourself?

 

Imagine the thrill of showing everyone you know that:

-Special motorcycle intake box that you cast and polished
-Necklace charm that you made and set the stones
-Hand made cabinet drawer pulls that you  sand casting
-Tool that you always needed but no one ever made
-Fixing that broken trim piece on your car

 

What about all of the things that sculptors do with bronze and aluminum?

 

For that matter, melting down your own pop cans and car wheels for the aluminum and becoming your own recycle station.

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850987/Toupee-s-blog/The-Proper-Casting-Processes

2 years ago

Why we prefer peanut butter?

Why we prefer peanut butter?

Many people loved getting pb&j sandwiches in their lunch box—even in dinner. That's when peanut butter turned into a guilt-ridden indulgence akin to candy bars, cookies, and cakes: diet disasters to be avoided at all costs. Here's why I was wrong:

 

It helps you lose weight
Calling peanut butter a diet food, with 180 to 210 calories per serving, may seem counter-intuitive. But it has the enviable combination of fiber (2 g per serving) and protein (8 g per serving) that fills you up and keeps you feeling full longer, so you eat less overall. Plus, there's nothing more indulgent than licking peanut butter off a spoon--and indulgence (in moderation) helps dieters fight cravings and stay on track.

 

It's got the good fat
Peanut butter is chock-full of heart-healthy monounsaturated fat. A recent study found that insulin-resistant adults who ate a diet high in monos had less belly fat than people who ate more carbohydrates or saturated fat. PS: If you're buying reduced-fat peanut butter because you think it's better for your waistline, save your money. The calories are the same (or even a little higher) thanks to the extra ingredients that are added to make up for the missing fat (including more sugar).

 

In a mixing bowl with a hand-held electric mixer, beat egg; blend in brown sugar. Combine flour, soda, and salt in a separate bowl; add to egg mixture a little at a time, alternating additions with the oil. Stir in vanilla and peanuts. Drop by teaspoonfuls onto greased baking sheet. Bake peanut cookies at 375° for about 6 to 8 minutes.


Makes about 3 dozen peanut cookies.

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850985/Toupee-s-blog/Why-we-prefer-peanut-butter

2 years ago

Urea prices keep slight rising

Urea prices keep slight rising

Domestic urea market keep steady recently. Due to the export driven, most manufacturer rasing their price. Recently, a good rain in Shandong Province, so downstream farmers being stimulated. But due to the overall market ended, so just “purchase piecemeal”. however, because the bright situation of the export. The actually keep slight rising.

 

Besides, the granular urea is badly shortage in Chinese market, most buyer face a new dilemma: with money in hand, they can’t buy the granular urea.

 

Recently, due to the positive export situation, coupled with the increase in industrial purchases , the price of urea in some areas frequently raised. Shandong region by supporting pre-export and industrial orders, combined with some factory shutdowns yet to resume production, most companies offer a substantial factory raised about 1620 RMB / ton, 80 RMB / ton higher than previous quotation. Their actually sold at the price 1590-1620 RMB/ ton. Two Rivers Market also maintain a good market, the sales situation in Hebei bit light, export orders remained strong point in the implementation of major markets, most manufacturers offer late last week raised about 70 RMB/ ton, rose to 1600 RMB/ ton the actual land sales prices in the 1550-1580 RMB/ ton, Henan Province is not only relatively good export market, domestic same smooth, within a week most manufacturers offer up nearly 110 RMB/ ton, is now mainstream factory price 1640 RMB/ ton the actual land sales prices in the 1600-1630 RMB/ ton.

 

Related post:http://blog.enfemenino.com/blog/seeone_636721_9850983/Toupee-s-blog/Urea-prices-keep-slight-rising